The customer looked for a fully-automatic and eco-friendly cleaning process for removal of conformal coating Peters ELPEGUARD SL 1307 FLZ from coating frames. Before, they used mechanical force with the usage of a thinner to remove the conformal coating. It was harmful to the worker and to the environment as well. Moreover, the mechanical removal of the Peters coating causes coating frames to become scratched.
Our R&D team tested the cleaning ability of 1 piece of coating frame, which is used during PCB conformal coating with Peters ELPEGUARD SL 1307 FLZ in customer’s production.
Peters coating is one of the most common coatings used in the electronic production.
Other recommended
cleaning systems
As contamination of coating frames was relatively low, testing in ultrasonic Sonix® 355 CRRD took only 30 minutes. If the cleaning process in the ultrasound cleaning machine is very quick, it is possible to clean Peters coating also in Injet® series, with Spray-In-Air technology.
Ultrasound cleaning systems are the most expensive due too high-tech technology. However, if the contamination is higher, Sonix® is probably the only reasonable solution considering the cleaning time, which is always longer in the Injet series.
+420 725 337 729
info@dct.cleaning
Kontaktní adresa:
Havlíčkova 18
680 01 Boskovice
Fakturační údaje:
Tovární 85, 679 21 Černá Hora
DCT Czech s.r.o.
IČ: 27670937
DIČ: CZ27670937
Společnost realizuje projekt s názvem „Marketingová podpora exportu DCT Czech s.r.o.“, reg.č. CZ.01.2.111/0.0/0.0/16_047/0008507, který je spolufinancován z operačního programu Podnikání a inovace pro konkurenceschopnost, tedy ze zdrojů Evropské unie. Obsahem projektu je propagace společnosti DCT Czech s.r.o. na 2 zahraničních veletrzích v letech 2017-2019 pořádaných v Německu, které jsou zaměřené na obor podnikání žadatele. Realizace projektu povede k rozvoji a růstu konkurenceschopnosti společnosti, posílení prezentace v zahraničí, získání nových zákazníků a povede k nárůstu objemu exportu a celkových tržeb společnosti.
