The customer searched for a cleaning solution for the removal of silicon glue from the stencils. They contacted our competitors first, which only sent them a sample of their cleaning agent without any personal visit. Unfortunately, the competitors also did not provide any technical assistance with testing of the product. The customer used the fluid in our InJet® cleaning system, which they have bought from DCT in the past. As the result, the competitive cleaning agent completely dissolved all rubber seals, which caused severe leakage. Because of this negative experience, the customer contacted us and asked for a complete cleaning solution.
We tested what is the most effective way of cleaning stencils polluted by thermoconductive silicon adhesive.
Type of Silicon Glue: DowSil (Dow Corning) 4450
DCT Cleaning is a customeroriented company and our priority is personal contact with the customers. Only due to on-site testing, we can fully understand the cleaning needs of the particular cleaning project.
Proton® 707 is highly effective cleaning fluid, designed to remove cured and uncured conformal coatings from coating frames, PCBs and components of coating machines arts.
Other recommended
cleaning systems
During the long-term on-site testing of the compatibility, we reached 100 cycles with no damage to the stencils and consistent 100% cleaning efficiency.
After cleaning with Proton® 705 in InJet® 388 CRD, stencils were completely without silicon glue residues. Even the residues which were presented on the edges were completely dissolved.
The results of the testing were excellent as supposed because our cleaning agents are always fully compatible with our cleaning systems, this our mission – to provide better and complete cleaning solutions. The customer is currently using our cleaning system as well as our cleaning fluid and is very satisfied.
+420 725 337 729
info@dct.cleaning
Kontaktní adresa:
Havlíčkova 18
680 01 Boskovice
Fakturační údaje:
Tovární 85, 679 21 Černá Hora
DCT Czech s.r.o.
IČ: 27670937
DIČ: CZ27670937
Společnost realizuje projekt s názvem „Marketingová podpora exportu DCT Czech s.r.o.“, reg.č. CZ.01.2.111/0.0/0.0/16_047/0008507, který je spolufinancován z operačního programu Podnikání a inovace pro konkurenceschopnost, tedy ze zdrojů Evropské unie. Obsahem projektu je propagace společnosti DCT Czech s.r.o. na 2 zahraničních veletrzích v letech 2017-2019 pořádaných v Německu, které jsou zaměřené na obor podnikání žadatele. Realizace projektu povede k rozvoji a růstu konkurenceschopnosti společnosti, posílení prezentace v zahraničí, získání nových zákazníků a povede k nárůstu objemu exportu a celkových tržeb společnosti.
