Our customer struggled to find a company, which would provide an efficient solvent to remove silicone-based conformal coatings from coating frames.
Based on positive references from other customers, we were asked to find a functional cleaning agent for the cleaning of silicons. We have solved customer’s problem by recommendation of our cleaning agent Proton® 703.
However, after a month our R&D team developed a cleaning agent even more efficient and stronger – Proton® 705. We agreed with the customer to test Proton® 705 as well and to compare the testing with the previous cleaning results with Proton® 703.
Our laboratory specialists were given 10 coating frames contaminated from the real process.
Size of the samples: 40 x 40 x 5 cm.
Some of the frames contained stainless steel parts and some only steel parts, which is a very important difference as we observed during testing.
In the combination of Injet® 888 CRRD with Proton® 705, excellent results were observed!
All the silicone residues vanished after 15–20 minutes!
As Proton® 705 is a very strong and effective cleaning agent, lesser compatibility may occur with some metal parts of the frames. Then we would recommend using acidic fluid Decotron® ACW 117 for rinsing to prevent the corrosion. In any case, we strongly recommend testing the components in our DEMO center before real usage at a production as we can customize the fluid for you in terms of efficiency and compatibility.
Proton® 705 is our newest and the strongest cleaner for the removal of silicons from PCBs, coating frames, and components of coating machines parts.
Other recommended
cleaning systems
As Proton® 705 has lower compatibility with some metal components, we observed that parts with stainless steel remained the same after cleaning and were fully compatible with the cleanaing process, basic steel parts started to corode.
Nevertheless, the customer was so excited about Proton® 705 as it is so fast and effective, so their company developed new generation of coating frames containing only stainless steel, which are compatible with the cleaning process.
+420 725 337 729
info@dct.cleaning
Kontaktní adresa:
Havlíčkova 18
680 01 Boskovice
Fakturační údaje:
Tovární 85, 679 21 Černá Hora
DCT Czech s.r.o.
IČ: 27670937
DIČ: CZ27670937
Společnost realizuje projekt s názvem „Marketingová podpora exportu DCT Czech s.r.o.“, reg.č. CZ.01.2.111/0.0/0.0/16_047/0008507, který je spolufinancován z operačního programu Podnikání a inovace pro konkurenceschopnost, tedy ze zdrojů Evropské unie. Obsahem projektu je propagace společnosti DCT Czech s.r.o. na 2 zahraničních veletrzích v letech 2017-2019 pořádaných v Německu, které jsou zaměřené na obor podnikání žadatele. Realizace projektu povede k rozvoji a růstu konkurenceschopnosti společnosti, posílení prezentace v zahraničí, získání nových zákazníků a povede k nárůstu objemu exportu a celkových tržeb společnosti.
