Decotron® 250

Water-based cleaning fluid determined to remove residues of a solder paste from printing stencils, PCBs misprints and squeegees.Ready-mix, intended for direct use. Effective for all types of solder pastes and most types of SMT adhesives. Intended for use in all types of cleaning machines, mainly in the high-pressure spray-in-air cleaning machines. Suitable to use cleaning machines without rinsing loop.

Cleaning parameters

Recommended technology

Solder paste (unsoldered)
High-pressure spray-in-air

Process table

Cleaning Technology

1. rinse

2. rinse

Drying

High-pressure spray-in-air
X
DI water
Hot air
Recommended for use in systems with closed cleaning processes and mechanical filtration
pH neutral fluid, rinse in not needed, only recommended
Eliminates potentional foaming of DI water during the rinsing process of the cleaning machine
High compatibility with material and components of the cleaning devices
Environment-friendly, biodegradable
Tenzide-free, no solid residues on the cleaned surface
No flash point, can be heated to increase the cleaning efficiency
Appearance
two-phase liquid
Colour
colourless / white
Odour
none
VOC content
32 %
Recommended process temperature
20 – 45 °C
Flash point
non-flammable
Density at 20 °C
0,98 kg/l
pH value
7

Are you interested in our solutions or
do you need help with your choice?

Contact us, our experienced sales representatives will be happy to advise you and propose a tailor-made solution to your requirements.

100% RESPONSIBILITY FOR THE CLEANING PROCESS

We take full responsibility for the functionality of the cleaning process.

Complete cleaning solutions

We can offer complete cleaning solutions for all existing applications.

Quality of cleaning systems

We manufacture cleaning systems exclusively in stainless steel because it has long-term advantages.

pure quality of cleaning agents

We care about the functionality of the cleaning chemistry, but also about ecology.

Technical and economic improvements

With every project, our greatest motivation is to bring the customer a better technical and economic solution.

Development and customization

By continuously developing our cleaning technologies, we are moving forward and responding to developments in the electronics industry.

Democenters Worldwide

We give customers the opportunity to actually test the cleaning solution.

Direct service Support

For us, service support does not end with the installation, it begins.

References

Our references show the diversity of our customers and how we have been able to
to tailor our services to their needs and expectations.

continental
vitesco 1
samsung
panasonic 1
magnet-mirelli 1
Celestica_logo.svg
flex
honeywell
jabil 1
hella 1
philips
plexus 1
wabco 1
foxconn 1
siix 1
sanmina-logo_2 1
johnson
valeo 1
new-usi-logo-slogan2
benchmark-electronics2
At Tyco Fire Protection Products, our primary focus is on fire protection products and services. With the transition to lead-free soldering, we have struggled with the quality of washdown results for PCBs after the soldering process. Thanks to our long-standing relationship with DCT Czech, their expertise in cleaning, flexibility and customer solution orientation, we successfully changed and implemented a new PCB cleaning process using vertical spraying. DCT Czech designed and manufactured a high-capacity cleaning system for us, which we have been using successfully for almost 2 years.
Zobrazit více
Tyco Electronics
Radek Matuška
Process Engineer
matuska
DCT Czech helped us to solve the application of cleaning the printing templates from the residues of solder paste and SMT glue and at the same time cleaning the soldered PCBs from the residues of flux. After implementing the new Injet 388 mCRD cleaning technology and Decotron CP381 cleaning agent, it is possible to clean all parts in one cleaning machine with one type of cleaning fluid. A comprehensive solution has thus been achieved that ensures long-term stable cleaning results. We are also working with DCT Czech to improve other cleaning processes in our production.
Zobrazit více
Connectgroup
Miroslav Černý
Process Engineer
cerny
We have been cooperating with DCT since 2006. We use DCT washing processes for cleaning: stencils, PCB overprints, soldering frames, filters from reflow ovens and also for manual cleaning. We are very happy and satisfied with our cooperation with DCT. We appreciate the support directly from DCT, but also from local DCT specialists.
Zobrazit více
Celestica Romania
Bogdan Opris
NPI Press Engineer
opris
Continental Automotive Czech Republic – Frenštát pod Radhoštěm is assembling PCBs for a major automotive client that requires maximum reliability of all its parts. Due to these high quality requirements, we were looking for a suitable supplier who could set up the entire cleaning process after soldering these PCBs. By working with DCT, we were able to gradually eliminate most of the technical problems associated with the cleanliness of the parts and satisfy a very demanding customer. What we appreciate most about our cooperation is the expertise of the DCT team and their ability to flexibly address emerging technical issues and the more stringent requirements of the end customer.
Zobrazit více
Continental Automotive Czech Republic
Zbyněk Zahradil
Quality Department
zahradil
For 40 years, SEHO Systems GmbH has been the world’s leading manufacturer of complete solutions for soldering processes and automated production lines. Many pioneering innovations in the field of soldering have their origin in SEHO. With our modern, innovative systems and the high quality standard of our products, we are a strong and reliable partner for our international customers. DCT Czech s.r.o. provides us with the ideal system solution for the cleaning processes required in our technology centre. Thanks to the comprehensive solution from DCT Czech s.r.o. we are very successful in cleaning the filter systems of our soldering lines as well as soldering accessories such as soldering frames used in wave soldering processes. We use the INJET 888 CRRD in conjunction with the Decotron T383 cleaning fluid from DCT. We are very satisfied with this technology because it meets the most demanding requirements in the cleaning process.
Zobrazit více
SEHO Systems GmbH
Frank Schneider
application technician
schneider