Sistemi za čišćenje

Proizvodimo kvalitetne mašine za čišćenje od nerđajućeg čelika, pouzdane i izdržljive, sa najširim asortimanom na tržištu i najdužom garancijom.

InJet®

The InJet® series has many variants and possibilities of use. It is most often used for cleaning applications in printing, but the ever-increasing requirements for the cleanliness of PCB boards from flux are used in PCB cleaning procedures.

Accessories for cleaning machines

The mentioned accessories increase the quality of the rinse water for the final rinse with ultra-pure DI water or extend the life of the rinse liquid in the tank, thanks to the filter bags that trap the contaminants.

Sonix®

Air-Bubble with ultrasonic technology achieves the highest efficiency of the cleaning process in specific applications. Such as cleaning: Coating frames, Parts of coating machines and Coated PCBs.

AirJet®

The AirJet® has several different variants, including smaller systems, fully automatic versions or systems for cleaning extra-large production parts. All three chambers can be used simultaneously to maximize capacity.

InJet®

InJet® 388 CD

InJet® 388 CD is a basic cleaning solution to remove solder pastes from stencils, squeegees and one-sided misprint or can be used for PumpPrint cleaning after consultation.

InJet®

InJet® 388 CRD

InJet® 388 CRD is developed primarily for the removalof solder pastes and SMT adhesives from stencils, PumPrints,squeegees and misprints. The cleaning system can also be used for PCB cleaning, or for a combination of PCB cleaning and the afore-mentioned cleaning processes. The machine can also be us...

InJet®

InJet® 388 CRD 2PR

The cleaning system is developed primarily for cleaning boards after soldering or for a combination of board cleaning and for removing solder paste and SMT adhesives from stencils, PumpPrints, squeegees and misprints. Another option is to use the machine for removing cured coatings from PCBAs. All p...

InJet®

InJet® 388 CRRD 1PR "Combo"

The InJet® 388 CRRD “Combo” is primarily designed for precision plate cleaning after soldering. The cleaning system can also be used for high-quality removal of solder pastes and SMT adhesives from stencils, PumpPrint, squeegees and misprint, or the aforementioned cleaning applications, along with c...

InJet®

InJet® 388 TWIN CRD "Sausage dog"

InJet® 388 TWIN CRD is primarily developed for the cleaning flux residues from PCBs after soldering. The cleaning system can be also used for removing solder pastes and SMT adhesives from stencils, PumpPrint, squeegee, and misprint. All processes are fully automated and take place in 2 process chamb...

InJet®

InJet® 388 TWIN CRD 2PR "Sausage dog"

The InJet® 388 TWIN CRD 2PR "Sausage Dog" is designed primarily for high-capacity and precise cleaning of boards after soldering (PCBAs). The cleaning system can also be used for the high-capacity removal of solder paste and SMT adhesives from stencils, PumpPrints, squeegees and misprints. The clean...

InJet®

InJet® 388 TWIN CRRD "Sausage dog"

InJet® 388 TWIN CRRD “Sausage Dog” is developed primarily for high-capacity and precise plate cleaning after soldering. The cleaning system can also be used for high-capacity removal of solder pastes and SMT adhesives from stencils, PumpPrint, squeegees and misprints. Cleaning takes place in the fir...

InJet®

InJet® 888 CRD 1F

InJet® 888 CRD-1F is designed primarily for removing flux residues from solder frames or for maintenance cleaning of soldering equipment parts. The machine is also great for removing cured and uncured conformal coatings from coating frames, PCBAs (varnish remover PCB), and coating machine parts comp...

InJet®

InJet® 888 CRD 2F

The InJet® 888 CRD-2F is developed primarily for the removal of smelting residues from soldering frames, and the maintenance cleaning of soldering equipment components. It can also be used for cleaning of conformal coating frames. The 2F designation refers to a 2-storey solution where smaller parts ...

InJet®

InJet® 888 CRRD 2F

The InJet® 888 CRRD-2F is designed primarily for removing flux residues from solder frames or for maintenance cleaning of soldering equipment parts. The machine is also great for removing cured and uncured conformal coatings from coating frames, PCBAs (varnish remover PCB), and coating machine parts...

InJet®

InJet® 3179 CRD "BigBoard"

InJet® 3179 CRD is designed to remove solder pastes and SMT adhesives from non-standard large stencils up to 100 x 1700 x 900 mm or 3.94 x 66.93 x 35.43 in, respectively. The process chamber's size also allows inserting and simultaneously cleaning 2 standard 29 ”x 29” stencils. The InJet® 3179 CRD i...

InJet®

InJet® 388 TRIPLE CRRD

InJet® 388 TRIPLE CRRD is developed primarily for high-capacity and precise plate cleaning after soldering. All processes are fully automated and run in 3 separate process chambers, where the cleaning takes place in the first inlet chamber, then the cleaned part is automatically transported to the c...

InJet®

InJet® 388 DOUBLE TRIPLE CRRD

The InJet® 388 DOUBLE TRIPLE CRRD offers more than twice the cleaning capacity of the InJet® 388 TRIPLE CRRD and is a high-performance vertical spray system for cleaning boards after soldering, for which it was developed. The washing system can also be used for high-capacity removal of solder paste ...

AirJet®

AirJet® 486 CRD

The AirJet® 486 CRD is designed for the maintenance cleaning of reflow ovens and wave soldering machines parts. All processes are automated and take place in 3 separate process chambers, which are also storage tanks. Cleaning takes place in the first inlet chamber, where the operator places the bask...

AirJet®

AirJet® 4127 CRD

AirJet® 4127 CRD is designed for maintenance cleaning of reflow ovens and waves soldering machines parts. All processes are automated and take place in 3 separate process chambers, which are also storage tanks. Cleaning takes place in the first inlet chamber, where the operator places the basket of ...

AirJet®

AirJet® 594 CRD - SAC

AirJet® 594 CRD - SAC is designed for maintenance cleaning of reflow ovens and waves soldering machines parts. The AirJet® 594 CRD is equipped with a motorized manipulator for easy lowering the baskets, then pulling out the baskets and moving them between the process chambers. Thanks to this device,...

Accessories

External filtration

Large-capacity external filtration, made completely of stainless steel, is another of a number of unique solutions for filtering of rinse water from the production of DCT Czech s.r.o. The system uses the sandwich filtration continuously connected in three filter tanks. These are interconnected by st...

Accessories

1 PR Filtration

This system makes it possible to rinse PCBs or stencil with de-mineralised water with a conductivity of about 0.5 uS and a pressure of 0.2 bar. This gives the customer a precise final rinse during the process itself. The filtration system is firmly attached to the cleaning system structure. This PR ...

Accessories

2 PR Filtration

This 2PR FILTRATION (Two-Phase Rinsing Filtration) is a unique filtration system of rinse water developed in DCT Czech s.r.o. This system operates continuously in 2 phases of rinsing. In the 1st phase, rinsing water flows through a mechanical filter with a pressure of 1 bar and a conductivity of 400...

100% ODGOVORNOST ZA PROCES ČIŠĆENJA

Preuzimamo punu odgovornost za funkcionalnost procesa čišćenja.

KOMPLETNA REŠENJA ZA ČIŠĆENJE

Možemo ponuditi kompletna rešenja za čišćenje za sve postojeće aplikacije.

KVALITET SISTEMA ZA ČIŠĆENJE

Sisteme za čišćenje proizvodimo isključivo od nerđajućeg čelika jer ima dugoročne prednosti.

ČIST KVALITET SREDSTAVA ZA ČIŠĆENJE

Brinemo o funkcionalnosti hemije za čišćenje, ali i o ekologiji.

TEHNIČKA I EKONOMSKA POBOLJŠANJA

Sa svakim projektom, naša najveća motivacija je da klijentu donesemo bolje tehničko i ekonomsko rešenje.

RAZVOJ I PRILAGOĐAVANJE

Kontinuiranim razvojem naših tehnologija čišćenja, idemo napred i odgovaramo na napretke u elektronskoj industriji.

DEMOCENTRI ŠIROM SVETA

upcima dajemo priliku da zaista testiraju rešenje za čišćenje.

DIREKTNA SERVISNA PODRŠKA

Za nas se servisna podrška ne završava instalacijom, već počinje.

Od otvaranja našeg novog pogona, dodali smo i InJet®388 za čišćenje šablona i AirJet®594 za pranje reflov izmenjivača toplote. Zahtevali smo višestruke izmene dizajna za InJet i DCT je sarađivao sa nama na modifikaciji mašine u skladu sa tim. Radimo 24/7 i imali smo izuzetnu uslugu sa DCT noć/dan/vikend. Mašine su napravljene veoma dobro i nismo imali većih hardverskih ili softverskih problema u poslednje 2 godine.

Zobrazit více

Continental Corporation

Kristofer Tredvej

SMT menadžer

U Tico Fire Protection Products, naš primarni fokus je na proizvodima i uslugama za zaštitu od požara. Sa prelaskom na lemljenje bez olova, borili smo se sa kvalitetom rezultata ispiranja PCB-a nakon procesa lemljenja. Zahvaljujući našoj dugogodišnjoj saradnji sa DCT Czech, njihovoj stručnosti u čišćenju, fleksibilnosti i orijentaciji na rešenja za kupce, uspešno smo promenili i implementirali novi proces čišćenja PCB-a korišćenjem vertikalnog prskanja. DCT Czech je za nas dizajnirao i proizveo sistem za čišćenje velikog kapaciteta, koji uspešno koristimo skoro 2 godine.

Zobrazit více

Tyco Electronics

Radek Matuška

Procesni inženjer

DCT Czech nam je pomogao da rešimo čišćenje šablona za štampanje od ostataka lemljene paste i SMT lepka i istovremeno čišćenje zalemljenih PCB-a od ostataka fluksa. Nakon implementacije nove tehnologije čišćenja Injet 388 mCRD i sredstva za čišćenje Decotron CP381, moguće je očistiti sve delove u jednoj mašini za čišćenje sa jednom vrstom tečnosti za čišćenje. Tako je postignuto sveobuhvatno rešenje koje obezbeđuje dugoročne stabilne rezultate čišćenja. Takođe radimo sa DCT Czech na poboljšanju drugih procesa čišćenja u našoj proizvodnji.

Zobrazit více

Connectgroup

Miroslav Černý

Procesni inženjer

Sa DCT-om sarađujemo od 2006. DCT procese koristimo za čišćenje: šablona, PCB štamparskih grešaka, okvira za lemljenje, filtera iz reflov peći, kao i za ručno čišćenje. Veoma smo srećni i zadovoljni saradnjom sa DCT-om. Cenimo podršku direktno od DCT-a, ali i od lokalnih DCT stručnjaka.

Zobrazit více

Celestica Romania

Bogdan Opris

NPI inženjer za štampu

Continental Automotive Češka Republika – Frenštat pod Radhoštem sastavlja PCB za velikog klijenta u automobilskoj industriji koji zahteva maksimalnu pouzdanost svih svojih delova.Zbog ovih zahteva visokog kvaliteta, tražili smo odgovarajućeg dobavljača koji bi mogao da postavi ceo proces čišćenja nakon lemljenja PCB-a. Radom sa DCT-om uspeli smo da postepeno otklonimo većinu tehničkih problema vezanih za čistoću delova i zadovoljimo veoma zahtevnog kupca. Ono što najviše cenimo u našoj saradnji je stručnost DCT tima i njihova sposobnost da se fleksibilno pozabave novim tehničkim problemima i strožim zahtevima krajnjeg kupca.

Zobrazit více

Continental Automotive Czech Republic

Zbinjek Zahradil

Odeljenje za kvalitet

Već 40 godina, SEHO Sistems GmbH je vodeći svetski proizvođač kompletnih rešenja za procese lemljenja i automatizovane proizvodne linije. Mnoge pionirske inovacije u oblasti lemljenja potiču iz SEHO-a. Sa našim modernim, inovativnim sistemima i visokim standardom kvaliteta naših proizvoda, mi smo snažan i pouzdan partner za naše međunarodne kupce. DCT Czech s.r.o. pruža nam idealno sistemsko rešenje za procese čišćenja potrebne u našem tehnološkom centru. Zahvaljujući sveobuhvatnom rešenju kompanije DCT Czech s.r.o. veoma smo uspešni u čišćenju sistema filtera naših linija za lemljenje, kao i pribora za lemljenje kao što su okviri za lemljenje koji se koriste u procesima talasnog lemljenja. Koristimo INJET 888 CRRD u kombinaciji sa tečnošću za čišćenje Decotron T383 iz DCT. Veoma smo zadovoljni ovom tehnologijom jer ispunjava i najveće zahteve u procesu čišćenja.

Zobrazit více

SEHO Systems GmbH

Frank Šnajder

Tehničar za primenu

Kontakt