Czech Republic

At the Democentre at DCT, you can test our machines (InJet, AirJet, Sonix) directly, as well as test your own samples. These include PCBA, soldering and coating frames, parts from reflow ovens and coating lines, or stencils and squeegee from SMT or any other machine parts from other production. Our R&D team will be fully available to help you choose the best fluid for your application. Together, you will clean, test and evaluate the samples.
logo_180px
388_CRD
InJet® 388 CRD
InJet® 388 CRD is developed primarily for the removalof solder pastes and SMT adhesives from stencils, PumPrints,squeegees and misprints. The cleaning system can also be used for PCB cleaning, or for a combination of PCB cleaning and the afore-mentioned cleaning processes. The machine can also be used for the removal of cured conformal coating.
388_TWIN_CRD
InJet® 388 TWIN CRD 2PR "Sausage dog"
The InJet® 388 TWIN CRD 2PR "Sausage Dog" is designed primarily for high-capacity and precise cleaning of boards after soldering (PCBAs). The cleaning system can also be used for the high-capacity removal of solder paste and SMT adhesives from stencils, PumpPrints, squeegees and misprints. The cleaning takes place in the first inlet chamber, after which the cleaned part is automatically transported to the second outlet chamber for the final rinse and drying process. Both chambers (inlet and outlet) can be used simultaneously, which increases the capacity of the machine and reduces cross-contamination compared to single-chamber machines. Thanks to 2PR filtration, the final rinse of printed circuit boards or stencils can be rinsed with demineralized water with a conductivity of approximately 0.5μS.
888_CRD_1F
InJet® 888 CRD 1F
InJet® 888 CRD-1F is designed primarily for removing flux residues from solder frames or for maintenance cleaning of soldering equipment parts. The machine is also great for removing cured and uncured conformal coatings from coating frames, PCBAs (varnish remover PCB), and coating machine parts components. The designation 1F indicates a 1-storey solution, primarily intended for cleaning larger parts.
DCT Czech s.r.o.
Havlíčkova 18
680 01
Boskovice
Czech Republic